Friday, 26 December 2008
I've played around over the past two days ( well, what else is Christmas Day and Boxing Day for ) and have taken a slightly different path to the same destination.
Instead of using Synaptic, Envy or apt get install, I chose to download the proprietary ATI driver from here.
This downloads a 80 MB file ati-driver-installer-8-12-x86.x86_64.run. It's necessary to make this file executable ( chmod +x ati-driver-installer-8-12-x86.x86_64.run ) and then execute it with root privileges ( sudo ./ati-driver-installer-8-12-x86.x86_64.run ).
The installer walks you through a series of simple screens, and, following a reboot, you're good to go.
Will continue to play ...
Sunday, 21 December 2008
When I used the ATI Catalyst Control Centre ( amdcccle ) to set my display resolution, I noticed that the changes were not being saved through a reboot. As an example, I could set the resolution to 1600x1200 to get the best out of my Thinkpad's HUUUUUGE screen, when I rebooted, the resolution would be back at 1024x768, which is a bit annoying.
As usual, Google had the answer, Google is my friend. I searched for "amdcccle saving" and found this article - the answer is to run gnome-display-properties and click Apply to save the current configuration ( this applet can be as a command ( ALT + F2 ) or via System -> Preferences -> Screen Resolution.
Strange but true
Friday, 19 December 2008
However, I think I've cracked it - I went back in time in my blog and found this post from September, where I'd fickered with /etc/default/acpi-support and changed: -
If it helps, I'm using the fglrx 8.54.3 driver which I got via apt-get install fglrx* - as far as I know, this is not a proprietary driver BUT I MAY BE WRONG.
If it helps, this is how I can see what driver I'm using: -
lsmod | grep -i fglrx
fglrx 1813960 32
agpgart 42184 2 fglrx,intel_agp
dmesg | grep -i fglrx
[ 42.639040] [fglrx] module loaded - fglrx 8.54.3 [Oct 10 2008] with 1 minors
01:00.0 VGA compatible controller: ATI Technologies Inc M56GL [Mobility FireGL V5200]
Subsystem: Lenovo Device 2007
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at ee100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at ee120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
Kernel modules: fglrx
sudo dpkg --list | grep -i fglrx
ii fglrx-amdcccle 2:8.543-0ubuntu4 Catalyst Control Center for the ATI graphics a
ii fglrx-kernel-source 2:8.543-0ubuntu4 Kernel module source for the ATI graphics acce
ii fglrx-modaliases 2:8.543-0ubuntu4 Identifiers supported by the ATI graphics driv
ii xorg-driver-fglrx 2:8.543-0ubuntu4 Video driver for the ATI graphics accelerators
ii xorg-driver-fglrx-dev 2:8.543-0ubuntu4 Video driver for the ATI graphics accelerators
fglrxinfo -display :0
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI MOBILITY FireGL V5200
OpenGL version string: 2.1.8087 FireGL Release
Having got fglrx installed and having hacked acpi-support, I can now suspend and resume.
I can also switch to a single or dual display ( using my Sharp Aquos 26" LCD display ) using the ATI Catalyst Control Centre ( command is amdccle ) to switch between screens.
I'll test a real projector later today ....
Thursday, 18 December 2008
Simply put, open Firefox, navigate to the address bar and enter the URL about:config. Assuming you're happy to proceed past those dragons, change the setting general.autoScroll to true. Once you restart Firefox, you're good to go.
Wednesday, 17 December 2008
Only one little niggle - USB support didn't work; I was getting
Failed to access the USB subsystem.
Could not load the Host USB Proxy Service (VERR_FILE_NOT_FOUND). The service might be not installed on the host computer.
when I attempted to edit the virtual machine's configuration.
However, as usual, Google had the answer ( and is my friend ).
As per this post, there are some post-installation incantations that you need to run.
Once done, we're good to go.
Next, I'm going to install WebSphere Portal or, perhaps, Lotus Connections onto the VM and see how it performs ....
I'd previously set this up in an earlier release ( I even found a developerWorks forum post from myself back in 2006 ), but had forgotten precisely how to do it.
I confused myself by reading the formal documentation so ended up hacking around and stop/starting the portal several times.
In the end, the trick was to: -
a) Amend C:\IBM\WebSphere\wp_profile\PortalServer\config\SiteAnalyzerLogService.properties and add/change: -
( there are a number of other isLogging parameters to choose from )
b) Push the updated properties into the portal configuration, using the command: -
from the directory C:\IBM\WebSphere\wp_profile\ConfigEngine.
c) Restart the portal
Once this has been done, you can see/change the properties by logging into the WebSphere Application Server administration console ( https://localhost:10041/ibm/console ) and then navigating to Resource > Resource environment providers > WP SiteAnalyzerLogService > Custom properties as per the screenshot.
Having restarted the portal, and logged in, I now see data such as: -
192.168.44.1 - - [17/Dec/2008:11:33:14 +0000] "GET /Page/6_CGAH47L0082M302B566VO730M6/null HTTP/1.1" 200 -1 "" "Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:22.214.171.124) Gecko/2008111318 Ubuntu/8.10 (intrepid) Firefox/3.0.4" "pSite=http%3A//www-304.ibm.com/jct03001c/services/learning/ites.wss/us/en%3FpageType%3Dcourse_description%26courseCode%3DPW510;sasidp=S420311311229505852077;90130510_clogin=l=1229505853&v=1&e=1229514686475;CoreID6=62742661401312295058533;ibmSurvey=1229505848905;sauidp=U420311311229505852077;satst=test"
192.168.44.1 - - [17/Dec/2008:11:33:14 +0000] "GET /Portlet/5_CGAH47L0082M302B566VO730E4/Login_Portlet?PortletPID=5_CGAH47L0082M302B566VO730E4&PortletMode=View&PortletState=Normal HTTP/1.1" 200 -1 "http://stargate.uk.ibm.com/Page/6_CGAH47L0082M302B566VO730M6/null" "Mozilla/5.0 (X11; U; Linux i686; en-GB; rv:126.96.36.199) Gecko/2008111318 Ubuntu/8.10 (intrepid) Firefox/3.0.4" "pSite=http%3A//www-304.ibm.com/jct03001c/services/learning/ites.wss/us/en%3FpageType%3Dcourse_description%26courseCode%3DPW510;sasidp=S420311311229505852077;90130510_clogin=l=1229505853&v=1&e=1229514686475;CoreID6=62742661401312295058533;ibmSurvey=1229505848905;sauidp=U420311311229505852077;satst=test"
being logged to C:\IBM\WebSphere\wp_profile\logs\WebSphere_Portal\sa.log.
I can now use my log analyser tool to see what's going on within my portal.
I'm actually using AWStats on my Ubuntu host whilst the portal is running within a VMware image.
I'll use the AWStats documentation as well as this excellent article from Stefan Liesche on developerWorks.
Tuesday, 16 December 2008
to force authentication to Quickr, and allow one to see the list of
Quickr places, whether public/anonymous or not.
This is useful when using the REST model/portlet within WebSphere
Monday, 15 December 2008
This useful page on developerWorks listing all the available wikis, together with their URLs.
Nice, wiki'd but nice.
WebSphere Portal 6.0
WAS Admin https://hostname:10039/ibm/console
WebSphere Portal 6.1
WAS Admin https://hostname:10041/ibm/console
Hope this helps me next time oldtimer's kicks in.
Friday, 12 December 2008
Have just downloaded the most excellent Lotusphere 2009 sessions
database from Genii Software's website here: -
I used this last year ( well, this year 'cos we're still in 2008 ) and
found it be of great use in planning my way around.
This year, I notice that they also have iPhone and Blackberry versions;
will try the iPhone version as well.
Instead, I saw: -
[12/12/08 17:05:40:640 GMT] 00000041 SystemOut O Inside-Out, Default.jsp: Exception raised: java.lang.NullPointerException
When I looked at the fix list for WebSphere Portal 6.10.1 at: -
I can see: -
PK74444 WebAppIntegrator throws a NullPointerException when urlFindInTheme tag is used in a Portal 6.1 theme
so I immediately went looking for the fix - sadly, it's not available as a standalone fix, but only as part of the fixpack.
Given that I wanted to get 6.10.1 installed, I started the download - thanks to the power of broadband, this 400 MB file didn't take too long.
However, whilst I was waiting, I was fickering around with my portal, trying to reproduce another issue with SSL/HTTPS. As part of my fickering, I toggled the theme for the top-level Content Root -> Home page from Portal Default Theme to PortalWeb2 and back again.
This seemed to "kick" WAI into life, and it's now working perfectly.
I can only assume that the theme toggle forced one of the theme JSPs to be recompiled or, perhaps, magic occurred.
In either case, WAI is now working WITHOUT needing to apply any fixes or fixpacks.
Friday, 5 December 2008
IBM and Business Partners Introduce a Linux-Based, Virtual Desktop
This solution runs open standards-based email, word processing, spreadsheets, unified communication, social networking and other software to any laptop, browser, or mobile device from a virtual desktop login on a Linux-based server configuration.
A virtual desktop looks like a traditional desktop but is not limited to a single physical computer. Instead, many virtual Linux desktops are hosted on a server. The combined solution includes:
Wednesday, 3 December 2008
This fix pack includes a cumulative collection of fixes and updated support for several underlying components. This fix pack updates the IBM WebSphere Portal 6.1 (188.8.131.52) level to the 184.108.40.206 service release level. This fix pack can be used to upgrade the IBM Workplace Web Content Management 6.1 (220.127.116.11) level to the 18.104.22.168 service release level. This fix pack can also be used to upgrade IBM WebSphere Portal Express 6.1 (22.214.171.124) level to the 126.96.36.199 service release level.
The complete list of fixes integrated into this refresh pack may be found in the technote Fix list for WebSphere Portal Version 6.1 and an updated set of system requirements.
Tuesday, 2 December 2008
It was a most excellent question to which I didn't have an immediate answer. However, thanks to my social network ( actually knowing the man who knew and finding him on Sametime ), I was able to help solve it.
It turned out to be a location preference/setting, which can be set as follows: -
a) Choose File -> Preferences -> Locations
b) Edit the location that you usually use
c) Navigate to the Mail tab
d) Set "Transfer Outgoing Mail If X messages pending" to 1
e) Click OK to save the location change
f) Click OK to save the preference change
Hope this helps someone as it helped Mike and I
( with thanks to Chris for his most timely and excellent help )
I was repeatedly seeing this: - java.lang.IllegalStateException: There is no body to invoke with a Jenkins Pipeline that I was executing...
I've just spent ~1 hour trying to get a pair of Powerline adapters to .... pair. This involved pressing a "Pair" button on one...
On IBM developerWorks here: - https://developer.ibm.com/cloudautomation/videos/ Use CAM to deploy Websphere Liberty into AWS Deploy MQ topol...
If you're running IBM Notes 9.0.1 and have updated to macOS 10.14 Mojave, be aware that you'll also need to install the most recent ...